Software part of racing setup i just making. Software is builded and tested on Arduino Leonardo.
Ilustration image:
Pedals: https://www.thingiverse.com/thing:4550372
- Classic (Potentiometer) mode (10KΩ) ☑
Steering Whell:
https://www.thingiverse.com/thing:3663155
Based on Thrustmaster T80 body QR adapter is in /stl folder
- Potetiometer mode (10KΩ) ☑
- Buttons: 10X 12mm Self-locking and Classic ☑
- Rotary controls :3X (10KΩ) potentiometer ☑
Paddle Shifters:
Taken from here : https://www.thingiverse.com/thing:4058270 ☑
Usage Platformio IDE:
- clone this repo
- add as platformio project
- compile and upload
Usage Arduino IDE: - clone this repo
- open .ino file in IDE
- install Vector.h lib https://www.arduino.cc/reference/en/libraries/vector/
- install Joystick.h lib https://github.com/MHeironimus/ArduinoJoystickLibrary
- upload your code to device
Testing:
- testing site: https://hardwaretester.com/gamepad
F1 games stering features:
- MDF menu UP/DOWN , LEFT/RIGHT controll (MDFMenuControll)
- Presset for wheels change (F1WhellControll)
TODO:
- add wirring
- repair QR
- forcefeedback
